Rather, any and all parts purchased through this website are sold to you by your dealer. 2005-2007 Ford FocusFORD is not the seller of the parts offered for sale on this website. If a pump has been pushing fuel through a clogged filter for some time it can tend to loose pressure so check the. Start there reset the codes and drive it for a day if the code comes back move on to the fuel pump. Here is a link that shows how to test fuel pressure:I find when you have a P093 code its usually caused by a plugged fuel filter. One of these plugs should be from cylinder 5. Either check fuel pressure or pull a couple of spark plugs after trying to start it to see if they are wet or dry. Hi, As you likely already know, the P0193 is related to the fuel pressure sensor. The FRP sensor nominal output varies between 0.5 and 4.5 volts, with 0.5 volts corresponding to 0 MPa (0 psi) gauge and 4.5 volts corresponding to 26 MPa (3771 psi) gauge.TECHNICAL SERVICE BULLETIN 6.7L - Illuminated MIL With DTCs P1291, P1292, P0191 And/Or P06A6 - Engine Harness Chafe 19-2231 24 July 2019 Model: Issue: Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1291, P1292, P0191 and/or P06A6.Problemas de Prendió el código p0193. The FRP sensor measures the pressure difference between the fuel rail and atmospheric pressure. | P0193 FORD code description The FRP sensor is a diaphragm strain gauge device.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |